2 replies to this topic

[crazydave1978]

i was told that steering knuckles,spindles,and brakes from a 3/4 ton Dana 44 would fit on a 1/2 ton Dana 44 if anyone knows anythin bout it let me know soon

[jake_262]

i was told that steering knuckles,spindles,and brakes from a 3/4 ton Dana 44 would fit on a 1/2 ton Dana 44 if anyone knows anythin bout it let me know soon

I'm pretty sure that they would fit, but the only way you can tell exactly is to measure your steering Knuckle from top to the bottom, I beleive that the axles are the same from the 3/4 to the 1/2. But if you plan on doing this swap, don't use the early 76 front end for a donor, the spindle will be to long, and the disc brakes are one piece with the hub, not a very good idea from ford, plus that was the only time ford did this, and it makes it a bitch to find new rotors. hope this helps

[77 F-250]

yes they do fit i did it to my 77 f-250, but u need to do the brakes as well (bracket and caliper) or it will not work