Jump to content


Photo

anyone have pictures of 1976 ford f250 stock engine fan and radiator?


2 replies to this topic

#1 jim4

jim4

    Where's My Hammer!?!

  • Members
  • Pip
  • 7 posts

Posted 03 June 2007 - 03:16 AM

Hello everyone,
I have a 1976 f250 and need some pictures showing the radiator and fan on a 360 motor. My radiator and fan look stock. I purchased a new fan shroud and the fan does not fix into the shroud. My thoughts are 1. I have the wrong fan shroud. 2. I have the wrong water pump (too short), 3. I have the wrong radiator (it is a rear mount, bolts on back flange of radiator). If anyone has a stock 360 in one of these trucks and could take pictures for me or offer me some advice. I would appreciate it. The truck does not overheat but creeps up in hot weather sitting in traffic.

JIM :lol:

#2 La Ran

La Ran

    F-Series Newbie

  • Members
  • 1 posts

Posted 26 June 2007 - 03:56 AM

Hi Jim,
I'm new here, I just bought a 77 f 250 with a 460. The old owner told me the engine was running too hot so he took the thermostat out completely. I'm going to put a new one today at a lower temp. (180' as apposed to 195')
As far as the rest goes, it sounds like they gave you the wrong parts.

Good luck!

La Ran


Hello everyone,
I have a 1976 f250 and need some pictures showing the radiator and fan on a 360 motor. My radiator and fan look stock. I purchased a new fan shroud and the fan does not fix into the shroud. My thoughts are 1. I have the wrong fan shroud. 2. I have the wrong water pump (too short), 3. I have the wrong radiator (it is a rear mount, bolts on back flange of radiator). If anyone has a stock 360 in one of these trucks and could take pictures for me or offer me some advice. I would appreciate it. The truck does not overheat but creeps up in hot weather sitting in traffic.

JIM :lol:



#3 76Ford3604X4Flatbed

76Ford3604X4Flatbed

    F-Series Newbie

  • Members
  • 2 posts

Posted 16 October 2007 - 11:59 AM

I am looking for a new fan shroud (don't have the old one) for my 76 F-250...
Did you ever have any luck? or getting any photos?

I've got the original 360 and radiator and could send you photos of that - but I'm not sure it would help.

Thanks,
Aaron




Hello everyone,
I have a 1976 f250 and need some pictures showing the radiator and fan on a 360 motor. My radiator and fan look stock. I purchased a new fan shroud and the fan does not fix into the shroud. My thoughts are 1. I have the wrong fan shroud. 2. I have the wrong water pump (too short), 3. I have the wrong radiator (it is a rear mount, bolts on back flange of radiator). If anyone has a stock 360 in one of these trucks and could take pictures for me or offer me some advice. I would appreciate it. The truck does not overheat but creeps up in hot weather sitting in traffic.

JIM :lol:





Reply to this topic



  


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users