I have a 95 f150 4x4 swb and i am wanting to swap the axels from my 78 bronco into my f150 and i need to know if they will fit without fabrication
will these axels work?
Started by
ford4x4121
, Oct 02 2010 09:52 AM
1 reply to this topic
#2
Rickey
-
- Members
-
- 47 posts
It's Only Money, Right?
- Gender:Male
- Location:Mississippi
-
Interests:Hunting,Fishing,Fords.
Alabama Football!!!!!!ROLL TIDE!!!!!!!!!!!!!!!! - Favorite F-Series Year?:1977
Posted 07 October 2010 - 06:31 AM
I am wanting to do the same swop my self.From what I have read and seen the rear axle will swop out.May hve to get a joint like my 85 bronce for the rear.Where it has 9in caps on the axle side a 8.8 caps on the driveshaft side.The front you will need all the suspion parts out of the 78 to put under your 94.You can find and buy a after market track bar bracket on line.(track bar, radus arms and frame mounts,tie rods).This I know fro sure.
1977 F-150 460 makeing around 400hp ( My Pride and Joy)Told the X wife she would go
C-6 with shift kit before the truck would
L&L headers with single chamber flowmasters and turn downs and L&L ladder bars
4in ruff country lift with a 2in body kift.
35x12.50-15 mud tires on 15x10 chrome and black modular rims
cd player,2 amps,2 600watt Sony 10s
4.10 gears with a locker in the rear
Future plans is to level it up .Hate the ass end sitting higher that the front.AND scrap the crappy C-6 for a manual.
1985 Bronco 427 small block
Small cam for the moment,all aluminam top end
max cool radator,headers and 2 1/2 exhast with flowmaster and echo tips
C-6 with a 208 transfer
33x12.50-15 all terrain tires
8000 warn winch and brush guard
Needs a 5 speed and a solid front axle liek it should have came!!!!!!!!
1995 Ford F-150 Extended cab 4x4
Stock 5.8 with E40D tranny
Push button 4x4
True dual exhaust with NO cat under it.
32x12.50x15 Maxxis mudders
220,000 miles and still runs like new.
Just needs a 5 speed in it and a solid front axle like it should have came!!!!
C-6 with shift kit before the truck would
L&L headers with single chamber flowmasters and turn downs and L&L ladder bars
4in ruff country lift with a 2in body kift.
35x12.50-15 mud tires on 15x10 chrome and black modular rims
cd player,2 amps,2 600watt Sony 10s
4.10 gears with a locker in the rear
Future plans is to level it up .Hate the ass end sitting higher that the front.AND scrap the crappy C-6 for a manual.
1985 Bronco 427 small block
Small cam for the moment,all aluminam top end
max cool radator,headers and 2 1/2 exhast with flowmaster and echo tips
C-6 with a 208 transfer
33x12.50-15 all terrain tires
8000 warn winch and brush guard
Needs a 5 speed and a solid front axle liek it should have came!!!!!!!!
1995 Ford F-150 Extended cab 4x4
Stock 5.8 with E40D tranny
Push button 4x4
True dual exhaust with NO cat under it.
32x12.50x15 Maxxis mudders
220,000 miles and still runs like new.
Just needs a 5 speed in it and a solid front axle like it should have came!!!!
Reply to this topic
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
