I own a 91 model F-150 4 wheel drive with a 300 Straight 6 in it the motor just layed down on me although it has been a very good one I am wanting to replace it with a 302. I had the transmision rebuilt about a year ago and i was wanting to know if it will bolt up to the 302. I am thinking that it is the E4OD trans. I do know that it is the heavy duty one. Any info will help along with anything else that i might need to swap. Thanks
Engine Swap
Started by
Guest_bearcat_*
, Dec 28 2004 03:37 PM
2 replies to this topic
#2
Billz4x4z
-
- Members
-
- 107 posts
F-Series Maniac
- Location:Carnesville,GA
- Interests:Trucks,4 Wheelin,Workin on Stuff,campin,the outdoors,NASCAR,meetin new people to go wheelin with,Truck shows family time
Posted 28 December 2004 - 05:10 PM
should bolt right in with a change in motor mounts,you may have to modify the t-case mount but should work out ok
If ya don't get hung up once in a while your not wheelin hard enough
#3
BLADE262US
-
- Moderators
-
- 281 posts
F-Series Pimp
- Location:Michigan
- Interests:Ford there is nothing else =)
Posted 29 December 2004 - 12:10 AM
Pretty sure you have to have the V8 flywheel too as they are weighted different other than that it will bolt to your tranny and Billz4x4z is right you do have to change the motor mounts and actually the frame mounts to the V8 style as for the t case mount in a 91 it hangs off the back of the tranny so you wont have to change any of that 
Reply to this topic
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
