48 replies to this topic

[sweepersrgr8]

SWEET. Good job Freak.

[sweepersrgr8]

Justshootme is that a 'cuda shaker? Sure looks like one.

[walkdawg]

Freak you have a sweet rig.

[Justshootme84]

'Cuda??? No way, dude, it's from a Ford Falcon XY from Australia.

How can you tell the HP just by looking at an engine???

Good job, Freak!

[freak]

I had mine ran on a engine dyno before I put it in.The best horsepower was 422 @ 5500 rpm and the torque was 460lb ft @ 4000 rpm.From 1600 rpm to 5300 rpm the torque is in the 400 lb ft range.This was all with a 750cfm carb,I tried an 850 cfm carb,while it had more peak horsepower at 5500 rpm(439HP)the torque was not there.The 850 was just to big.

[Oscar]

here is my 96 351
http://www.supermoto...fullsize&f=.jpg

[Justshootme84]

What's that silver thing that the air tube is going into, a blower???

[sweepersrgr8]

See, I was right... in EXCESS of 400HP. This was just a guess, because I had a '77 F100 with a 400 with just a performer intake, 600 cfm holly, comps 270 off road cam, and mild porting that produced 396 rear wheel HP on the dyno. FREAKS looks much meaner.

[freak]

I put alot of time and money in my 400 and it was well worth it.

[dicain]

freak's bronco is what every chevy owner fears!

[hawk2100n]

here is my home made intake and air box. i ditched the old pre heater and air box and made up an airbox out of galvanized that sucks air from the retangular hole next to the radiatior.

[Wliebhard]

Let's try this again...
Here's my project money pit. A 12 valve Cummins with Intercooler, Auto tranny, 241 HD t-case, and computer out of a '95 1 ton Ram. If you have any questions, I probably have answers. I will be on the road Tuesday (next week ) RAAAAA MORE POWER!!!!!

[Wliebhard]

Freak, your ride is SICK

[Wliebhard]

mansquirt86- It went in with a 3" body lift, help from Ford-Cummins, and ALOT of 'massaging' from my sawz-all. I had to dump the A/C, but the top come off, right? I also installed the brake booster and M/C from a '97 f-350. I had coil spring specialties fab custom springs for me.

[4xfan78]

Hey freak ever had that monster on a dyno? Just wondering if you know how much hp you have.

[sweepersrgr8]

I had mine ran on a engine dyno before I put it in.The best horsepower was 422 @ 5500 rpm and the torque was 460lb ft @ 4000 rpm.From 1600 rpm to 5300 rpm the torque is in the 400 lb ft range.This was all with a 750cfm carb,I tried an 850 cfm carb,while it had more peak horsepower at 5500 rpm(439HP)the torque was not there.The 850 was just to big.

4XFAN, here's your answer.

Wliebhard, excellent job man!

[sweepersrgr8]

Hawk2100n, did you notice a difference with the cooler air coming in? It looks pretty good. I think you live down in SC near me. If so you don't really need the heat riser, but on really cold mornings you might wish you had it.

Do you have a pic of the box you fab'ed?